Euco Re-Cover
Euco re-cover is a polymer modified, fiber-reinforced concrete resurfacing mortar. Adding only water, Euco re-cover provides a fresh, aesthetically pleasing appearance to new concrete that has been marred by rain or plastic covering, old or spalled concrete, and salt damaged concrete.
FEATURES/BENEFITS
- Excellent working time at 70°F (21°C)
- Micro-fiber reinforced
- Open to foot traffic in 4 hours, rubber tire traffic in 12 hours at 75°F (24°C)
- Polymer modified
- Suitable for freeze-thaw environments
PRIMARY APPLICATIONS
- Driveways
- Sidewalks
- Pool decks
- Garage floors
- Elevated slabs
- Vertical concrete surfaces
Eucocrete Supreme
EUCOCRETE SUPREME is a versatile, single-component, latex and microsilica modified, repair mortar containing a migratory corrosion inhibitor, designed to provide protection from corrosion for repair projects of all types. Requiring only the addition of water, EUCOCRETE SUPREME is a high strength material which is easy to use with an extended working time for ease of placement. It is similar in appearance to concrete and is suitable for use as a topping or repair mortar on horizontal surfaces and formed vertical and overhead repairs.
FEATURES/BENEFITS
- Microsilica modified for high strength
- Pre-mixed with pea gravel, readyto-use
- Low permeability with excellent freeze/thaw resistance
- Contains an integral corrosion inhibitor
- Applications from 1” (25 mm) to full depth
- Interior or exterior
- Form and pour repairs
PRIMARY APPLICATIONS
- Parking decks
- Joint repairs
- Balconies
- Equipment bases
- Pavements
- Beams
- Form & pour jobs
EucoRepair SCC
EucoRepair SCC is a versatile, one component, self-consolidating repair mortar that is shrinkage-compensated, polymer and microfiber modified, and contains an integral corrosion inhibitor. It is designed for horizontal and formed vertical/ overhead structural repairs in applications from 1 inch (2.5 cm) to full depth
FEATURES/BENEFITS
- Shrinkage compensation and reduction to minimize cracking
- Pre-mixed with pea gravel, readyto-use
- Low permeability with excellent freeze-thaw resistance
- Polymer and microfiber modified
- Interior or exterior use
- Contains an integral corrosion inhibitor
- Long working time
PRIMARY APPLICATIONS
- Parking decks
- Joint repairs
- Balconies
- Equipment bases
- Pavements
- Beams
- Vertical and overhead formed repairs
EucoRepair V100
is a single-component, quick-setting, low shrinkage repair mortar formulated with unique polymers and fiber reinforcement for vertical and overhead repairs requiring high performance.
FEATURES/BENEFITS
- Single-component for easy mixing and handling
- Excellent freeze-thaw resistance for difficult climates
- Polymer modified with fiber reinforcement
- NSF/ANSI Standard 61 certified
- Contains an integral corrosion inhibitor
- Low permeability helps protect rebar from corrosion
- High bond strength provides excellent adhesion
- Apply coatings after 6 hours at 70 °F (21 °C)
PRIMARY APPLICATIONS
- Vertical and overhead repairs
- Parking structures & bridges
- Water and wastewater treatment facilities
- Marine structures, tunnels, and dams
- Above and below grade applications
Speed Crete Red Line
Speed Crete Red Line is a rapid-setting, cement-based concrete and masonry repair mortar. It is a proprietary formulation of blended portland cements, finely processed selected aggregates, and specific chemical additives that undergo a chemical “hyper hydration” and produces a stable, low permeability, cementitious matrix. It can also be “shaved” for detailed repairs.
FEATURES/BENEFITS
- Initial set in 8 to 20 minutes
- Final set within 30 minutes
- Can be “shaved” to desired shape
- High strength
- Excellent durability
- Compatible with galvanic anodes
PRIMARY APPLICATIONS
- Interior and exterior
- Vertical and overhead repairs
- Used at no slump consistency
- Outstanding repair material for concrete pipe, formed and precast concrete
Tammscrete
TAMMSCRETE is a single-component, polymer-modified, cement based material used for achieving a smooth finish on precast, cast-in-place, tilt-up or other unfinished concrete surfaces with imperfections.
FEATURES/BENEFITS
- Featheredge to 1/8” (3.1 mm), 1/4” (6.4 mm) when extended with sand
- Smooth, creamy consistency
- User friendly
- Low shrinkage
- Long working time
- Interior or exterior use
PRIMARY APPLICATIONS
- Fills bug holes and honeycombs
- Skimcoats
- Brightens and restores vertical and overhead concrete surfaces
Versaspeed LS100
VERSASPEED 100 is a versatile, single component, rapid strength gaining repair mortar for horizontal, and form and pour repair projects. Requiring only the addition of water, It is a low shrinkage, high early strength material that is easy to use for fast turn-around projects. Repaired areas may be open to standard tire traffic 5 hours following the final set. Versaspeed is similar in appearance to concrete and is suitable for use in repairing concrete surfaces from approximately 1/4” to 6” (6 mm to 15 cm) in thickness. VERSASPEED LS100 is a slower setting version of our popular VERSASPEED 100 material.
FEATURES/BENEFITS
- Rapid strength gain with extended working time
- Suitable for interior or exterior applications
- Open to light duty traffic as soon as 4 hours
- Coat with epoxy after 5 hours at 70 °F (21 °C)
- Micro-fiber reinforced
- Shrinkage compensated
- Contains an integral corrosion inhibitor
- Can be placed up to 4 in. (10 cm) neat
- Can be extended up to 50% by weight
PRIMARY APPLICATIONS
- Multi-unit residential
- Bridges
- Loading docks
- Highways and roads
- Pavements
- Warehouses
- Parking decks and ramps
- Industrial / commercial / institutional floors
- Vertical & overhead form and pour applications